Vturn X200
Multi-tasking Machines
The Vturn X200 is a multifunction turn-milling center with up to 12 axes working for the most complex types of workpieces. It offers eccentric operations such as milling, drilling and threading and carries an upper swivel milling spindle with 12,000 rev/min and powers up to 11 kW. The machine has an automatic tray and heat exchanger for 40 instruments.
| Specifications | ||
|---|---|---|
| Capacity | ||
| Swing over bed | mm | 960 |
| Swing over carriage | mm | 610 |
| Between centers | mm | 1123 |
| Max. turning length | mm | 1000 |
| Max. turning diameter | mm | 540 (limited by carriage cover) |
| Max. part diameter from 1st to 2nd spindle | mm | 210 (limited by opt. lower turret) |
| Travels | ||
| X1-axis (upper tool spindle) | mm | 600 |
| Z1-axis (upper tool spindle) | mm | 1100 |
| Y-axis (upper tool spindle only) | mm | 160 (±80) |
| B-axis | deg | 225 (+110 ~ -115) |
| X2-axis (lower turret) | mm | 150 |
| Z2-axis (lower turret) | mm | 782 (±391) |
| E-axis (2nd spindle) | mm | 1050 |
| Axis feed | ||
| X1/Z1/Y axis feed (upper tool spindle) | m/min | 36 / 36 / 18 |
| X1/Z1/Y/B axis motor power | kW | 5.5 / 7 / 4 / 3 |
| Ball screw dia. x pitch | mm | X1: 36 x P10, Z1: 40 x P12 Y: 36 x P10 |
| X2/Z2/E feed rate (lower turret and subspindle) | m/min | 18 / 20 / 20 |
| X2/Z2/E motor power | kW | 3 / 3 / 4 |
| Ball screw dia. x pitch | mm | X2: 32 x P10, Z2: 32 x P12 E: 36 x P10 |
| Main spindle (1st spindle) | ||
| 1st spindle nose (chuck) | inch | A2-6 (8″) |
| 1st spindle speed | rpm | 4200 |
| 1st spindle motor power (cont/20min/15%) | kW | 15 / 18.5 / 22 |
| Spindle bore | mm | 62 |
| Bearing inside diameter | mm | 100 |
| Bar capacity | mm | 52 |
| 2nd spindle | ||
| 2nd spindle nose (chuck) | inch | A2-6 (8″) |
| 2nd spindle speed | rpm | 4200 |
| 2nd spindle motor power (cont/20min/15%) | kW | 15 / 18.5 / 22 |
| Spindle bore | mm | 62 |
| Bearing inside diameter | mm | 100 |
| Bar capacity | mm | 52 |
| Upper tool spindle (B-axis milling head) | ||
| Turret type | rpm | Milling head with ATC |
| Positioning indexing resolution | deg. | 5 (by coupling) |
| Continuous indexing resolution | deg. | 0.001 (by roller gear) |
| Max. speed | rpm | 12000 |
| Milling motor power (cont. / 30 min. / 25%) | kW | 11 / 15 / 22 |
| ATC & tool magazine | ||
| Tool specification | – | HSK-T63 (Opt. KM-63UT) |
| Tool capacity | – | 40 |
| Tool selection | – | Fixed tool pot number |
| Max. tool diameter | mm | 90 |
| Max. tool length | mm | 280 |
| Max. tool weight | kg | 7 |
| Tool exchange time | sec | 1.8 (T-T), 11 (chip-chip) |
| Lower turret (Optional.) | ||
| No. of tools | – | 9 |
| Tool shank size | mm | 25 |
| Max. boring bar diameter | mm | 40 |
| Tool exchange time | sec | 1.2 (0.4 excl. disk up / down) |
| Machine | ||
| Controller | – | Fanuc 31i |
| Tank capacity | L. | 560 |
| Power requirement | KVA | 85 (95 with lower turret) |
| Floor requirement | mm | 5500 x 3400 x 2600 |
| Net weight | kg | 12000 |